2024 John Deere FC Series FC20M

Information

2024 John Deere FC Series FC20M

Flex Wing Rotary Cutter

20 ft. cutting width

540 or 1000 PTO RPM

Front and rear suspension options

Laminated, pneumatic, or foam filled 4-bolt tires

Features may include:

  • What is the best cutter for your job?
  • Safety
  • Warranty
  • Maintenance

Photos

Highlights

  • McPherson, Kansas
  • 2024
  • John Deere
  • FC Series FC20M
  • Available
  • 4 in. (102 mm)
  • Cutting: 1-16 in. (25.4-406.4 mm)

Specifications

  • 2024
  • John Deere
  • FC Series
  • FC20M
  • General
  • Transfer Continuous: 250 hp (186 kW) | Peak: 300 hp (224 kW) | Center Continuous: 100 hp (75 kW) / Peak: 216 hp (161 kW) | Outer Continuous: 100 hp (75 kW) / Peak: 216 hp (161 kW)
  • Tractor PTO HP range: 75 hp (56 kW) | 540 or 1,000 rpm
  • Size - Main: CV ASAE Category 5, splined telescoping profiles / Connecting: ASAE Category 5, splined telescoping profiles | Protection: No-seize, slip-clutch driveline
  • Five years
  • 4-bolt, laminated: 21x5.25x9 / 4-bolt, 16PR severe-duty ag: 21x7x12
  • Blade tip 540 rpm: 268.1 fps (81.7 m/s) / 1000 rpm: 272.4 fps (83 m/s )
  • Standard self-level hitch clevis with 22.5-in. (57.2-cm) narrow-profile width | Jackstand: Mechanical jack stand in base for all machines with hydraulically operated height, stays vertical while raising/lowering
  • 10 gauge - 0.135 in. (3.4 mm)
  • Cutting capacity (diameter): 3 in. (76.2 mm) | Side skirt: 3 gauge - 0.24 in. (6 mm) | blade Thickness: 0.5 in. (13 mm) | blade Overlap: 6 in. (152 mm) | Wing flex For transport: upward 90 degree (angle) / Working angles: upward 45 degree (angle) / downward 22 degree (angle)
  • 20 ft (6.1 m)
  • 11.1 ft (3.4 m) at wing wheels
  • Cutting: 1-16 in. (25.4-406.4 mm)
  • Cutting chamber: 10 in. (254 mm)
  • 20.3 ft (6.2 m)
  • 17.3 ft (5.3 m)
  • 4 in. (102 mm)
  • Approx: 6520 lb (2957 kg)
  • Deck shape: Easy-clean smooth top deck | Deck type: Single | Hinges: Intermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin | Gearcases Number: 4 | blade Type: Suction | Blade holder type: Round stump jumper for maximum protection for blade carrier against obstruction damage | Wing lift: Simultaneous | Shielding front: Single-row chain guard / rear: Single-row chain guard
  • Wing-leveling: Easy adjust turnbuckle with bearing
  • Gearboxes: 5-year warranty