2024 John Deere Heavy Duty Rotary Cutters RC14R

Information

2024 John Deere Heavy Duty Rotary Cutters RC14R

  • Larger, more durable gearboxes
  • Large-diameter, round-pan blade holders
  • Tractor hookup available
  • Max Flow cutting chamber for a clean cut

Features may include:

John Deere Double-Decker™ design for superior frame strength
  • The Double-Deck design also provides a sturdy base to support the gearcases. Gearcases need this sturdy base to resist the bending loads imposed upon them when blades contact immovable objects or the ground.
Larger, more durable gearcases
  • Heavy-duty, tapered roller bearings and precision gears help ensure long life.
Blades ensure clean cutting and fine shredding
  • Suction blades provide additional lift action for picking up downed material. The blades are 1.3 cm x 10.2 cm (0.5 in. x 4 in.) in size and heat-treated for long wear life.
Tractor hookup available in two configurations
  • The lift-type versions fit tractors with Category 2, 3, or 3N 3-point hitches (with or without Quick Hitch).
Warranty
  • John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

Photos

Highlights

  • McPherson, Kansas
  • 2024
  • John Deere
  • Heavy Duty Rotary Cutters RC14R
  • Available
  • Blades: 4 in. (102 mm)
  • Cutting: 1 to 12 in. (25 to 305 mm)

Specifications

  • 2024
  • John Deere
  • Heavy Duty Rotary Cutters
  • RC14R
  • Heavy-Duty
  • Transfer Continuous 120 hp (89 kW) / Peak: 180 hp (134 kW) / Outer Continuous 100 hp (75 kW) / Peak: 140 hp (104 kW) | Minimum pull-type: 50 hp (37 kW) | Minimum PTO lift-type: 80 hp (60 kW )
  • Lift-type: 90 hp (67 kw) / Pull-type: 45 kW (45 kW) | 540 rpm
  • Size: Main ASAE Category 5; lift-type / ASAE Category 4; pull-type | Protection: Non-seize, slip-clutch driveline pull-type has equal-angle Category 4 driveline / Connecting: Shock absorbing shafts
  • Type: Laminated
  • Blade tip speed: 540 RPM / 5,148 m/min / 16,889 fpm / 309 km/h / 192 mph
  • 2, 3, 3N | Lift-Type, Pull-Type (Pull-Type has standard 10,000 lb; 4,539 kg, Safety Tow Chain)
  • Upper: 0.141 (10) in. / (3.5 (10) mm) | Lower: 0.141 (10) in. / 3.5 (10) mm
  • Cutting capacity: 3 in. (76.2 mm) | Side skirt thickness: 0.25 (3) in. (6 (3) mm) | Blades Thickness: 0.5 in. (13 mm) | Overlap: 2.8 in. (75 mm)
  • 126 in. (3,200 mm)
  • Cutting: 1 to 12 in. (25 to 305 mm)
  • Cutting chamber: 10.5 in. (267 mm)
  • Blades: 4 in. (102 mm)
  • 132 in. (3,350 mm)
  • 13 ft. 9 in. (4.2 m)
  • 132 in. (3,350 mm)
  • 159 in. (4,040 mm)
  • Approx: 3,059 lb (1,390 kg)
  • Deck shape: Domed | Deck type: Double decker | Gearcases number: 3 | Blades Type: Single suction | Material flow system: Integrated | blades Holder: Round stump jumper (single suction) for protection of blades and carrier against obstruction damage | Shielding front: chain / rear: chain