2024 John Deere PrecisionCut™ Rough 7200A

2024 John Deere PrecisionCut™ Rough 7200A

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model PrecisionCut™ Rough
2024 John Deere PrecisionCut™ Rough 7200A

2024 John Deere PrecisionCut™ Rough 7200A

2024 John Deere PrecisionCut™ Rough 7200A

Trim and Surrounds Mower

TechControl™ Display locks in performance, and uptime

LoadMatch™ to maintain cut quality

35% larger traction drive, 17% larger wheel motor displacement

Reach trimming system for bunkers

Features may include:

  • TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics
  • eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities
  • Width on demand—match the conditions with the touch of a button
  • Final Tier 4 (FT4) diesel engine offers plenty of power for mowing
  • Maximum contour following for a premium quality of cut

Engine

Engine Power Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW) / per SAE J1349 @ 3000 rpm: 19.1 hp (14.2 kW)
Engine Type Indirect inject diesel
Displacement 77.32 cu in. (1.267 L)
Cooling Liquid centrifugal pump; forward machine location for optimum cooling
Air Cleaner Two-stage dry element
Oil Filter Full-flow filter
Cylinder Liners 3
Ignition Key start

Fuel System

Fuel Injection Indirect
Fuel Type Diesel
Fuel Usage, 100% Load Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality: 25% load: 0.46 gph (1.74 L/hr) / 40% load 0.7 gph (2.65 L/hr) / 50% load: 0.8 gph (3.03 L/hr)

PTO

PTO Type Electric switch on CommandARM

Drivetrain

Drive System Hydraulic, standard 3WD | Traction: 3 Wheel Drive Hydrostatic, equal traction to all wheels
Steering Tilt; Hydraulic power with double acting steering cylinder | Tilt: Left foot operated for easy adjustment

Brakes

Brake System Type Internal hydraulic wet disk brakes with dynamic braking through closed loop hydrostatic system
Parking Brake Electric switch on CommandARM for internal wet disk brakes

Wheels & Tires

Tires, Front Specification 24 x 12 - 12 turf trac
Tires, Rear Specification 24 x 12 - 12 multi trac

Operational

Operating Speed Mowing: 0-6 mph (0-10 km/h) | Transport: 0-9 mph (0-14 km/h) | Reverse: 6 mph (10 km/h)
Operating Conditions Clip frequency: 5-blade cutting unit, 0.201 in./mph (3.17 mm/km/h) / 8-blade cutting unit 0.126 in./mph (1.99 mm/km/h)
Emissions regulation: Tier 4

Performance

Noise Level Operator ear: 87 +/- 1 dBA

Hydraulics

Pump Type Drive: Gear
Ground Pressure 15 psi (103 kPa)
Hydraulic Type Reel control valves: Micro-backlap valve with reel speed control | Filtration: 10 micron and 100 mesh strainer | Cutting unit lift: 2 hydraulic cylinders

Dimensions

Dimensions Quick-Adjust 7 (QA7): 26 in. (66 cm) / QA7: 30 in. (76 cm) | Reel diameter: 7 in. (17.8 cm)
Ground Clearance 5.5 in. (14 cm)
Wheelbase 62 in. (157.5 cm)
Width Tread: 52 in. (132 cm) | Mowing position: 72 in. (183 cm) / 84 in. (213 cm)
Height With ROPS: 84 in. (213.4 cm)
Length 133 in. (338 cm)
Transport Width 68 in. (173 cm) / 72 in. (183 cm)

Capacities

Oil capacity 3.1 U.S. qt (3 L)
Fuel Capacity 12 U.S. gal. (45.4 L)
Hydraulic Capacity 10 U.S. gal. (37.8 L)

Weights

Weight Cutting units lowered: 2290 lb (1039 kg)

Features

Features Mower engagement: Hand | Mower Number: Three reel cutting units | Operator display: TechControl display: Located on CommandARM™ armrest; displays machine warnings, onboard electrical diagnostics; service timers on large, easy-to-read screen; quick on-the-go settings for mow and transport speed; turn speed; LoadMatch™ and ON/OFF cruise control use selection; all settings are passcode protected | Storage: Cup holder; two-way radio; large operator storage located on left-hand side of operator station
Throttle Hand
Knife Quantity Number of blades: Five or eight
Adjustability Bedknife: Reel-to-bedknife
Lift Mechanism Mower: One-touch single handle

Warranty

Warranty Two-year limited

Product Photography